|
|
Determination of climatic factor on the degradation of various solar cells types
Peroutka, Tomáš ; Jandová, Kristýna (referee) ; Vaněk, Jiří (advisor)
In this work are discussed photovoltaic cells. There are also discussed basic concepts of radiation source for solar cells. Also mentioned the issue of semiconductors and even the history and evolution of the solar cells. A large part deals with possibilities of photovoltaic cells degradation. In one chapter is an attempt to bring some types of photovoltaic cells and a description of the production of these modules.The practical part deals with photovoltaic modules degradation and its evaluation. Following part compares measured values with the values provided by producer of photovoltaic modules.
|
|
| |
|
|
Climatic tests of the calibrator 9010
Plánka, Mikuláš ; Sitta, Michal (referee) ; Šedivá, Soňa (advisor)
This bachelor thesis deals with climatic testing of Calibrator 9010. The content of this work is a theoretical analysis of climatic tests. Furthermore, the properties of the Caliber program are described here. Caliber program in this work is used for automated measurement. The next chapter in the work is a description of the properties and functions of the Calibrator 9010. In the practical part of the work, the points of the measurement itself are proposed. Based on the design of points, a procedure is created in the Caliber program. Procedure is used to measure data. The measured results in the work were evaluated.
|
|
|
SW for control of climate tests
Fedor, Denis ; Richter, Miloslav (referee) ; Petyovský, Petr (advisor)
This thesis deals with control of a specific climate chamber used for various climate tests. Therefore its elaboration starts with the identification of properties of this climate chamber and basic design of its control. This is followed by measuring the temperature distribution in its internal space in order to verify the usability of this climate chamber. The thesis also does not omit a description of the communication options between climate chamber and application for control of climate tests. The next part of this thesis concerns the design and implementation of the application for control of climate tests itself. On its output is a report of the performed climate test. In the end this thesis contains the description of program testing in the real operation of the company and other possible improvements of the implemented program.
|
|
|
Measurement of precise capacitance decade in environmental chamber
Schinneck, Jakub ; Bartoň, Jan (referee) ; Havlíková, Marie (advisor)
This bachelor’s thesis deals with the control capacitance decade in a climatic chamber. The theoretical part introduces a capacitance decade M525 of the MEATEST company and the program Caliber of the same company. It introduces the methods of capacitance measurement. In the bachelor’s thesis there is the calculation of the uncertainty of measuring devices. On the basis of the lowest uncertainty, we choose the most suitable measuring device. The practical part describes the measuring with the use of prepared procedure for verification of the capacitance of programmable decade. The last part contains the evaluation of the measurement results and their comparison with the manufacturer's specifications.
|
|
|
Computerized Climatic Test Chamber Control
Pálka, Václav ; Kubinec,, Peter (referee) ; Frýza, Tomáš (advisor)
Diplom work describes a proposal and the design of the device for controlling the temperature test in a climatic chamber Heraeus and the creation of software for operating equipment. Work describes in detail the design and construction interface for the climate chamber, with which will be able to run automated test sequences and the development of the firmware and the operating software to start the temperature test.
|
|
| |
|
|
Verification of setting speed and building adhesion of PU adhesives depending on external conditions
Slatinská, Jana ; Žák, Ladislav (referee) ; Kubíček, Jaroslav (advisor)
The company IFE a. S. (Knorr - Bremse) in Modřice needed to verify the curing process of glued joints with the used adhesive Sikaflex®-265. The aim was to find out whether a controlled environment is needed for curing and mainly find out influence of factors on the curing process and the velocity of building adhesion. The main factors that were investigated were temperature, humidity, the ratio of the Sikabooster® P-50 to the tested adhesive and the curing time. The result then shows which factors have an influence and which only minimal. The aim was also to verify the strength of the joint, which is stated by the manufacturer after a specific time. The impact on open technology time has not been measured.
|
|
|
Mathematical-physical analysis of climatic chamber
Repko, Ilia ; Bílek, Michal (referee) ; Maxa, Jiří (advisor)
This work deals with the mathematical and physical analysis of the climatic chambers. The theoretical part describes the issue of climatic chambers, software SolidWorks and ANSYS Fluent, basic equations describing fluid status and fluid turbulence. The practical part of the thesis is to create the model of climatic chamber in CAD system SolidWorks and simulation of flow and and temperature distribution by ANSYS Fluent. At the end of the work the results are analyzed and evaluated.
|
|
|
Regulation system for climatic test chambers
Burian, Jan ; Palíšek,, Libor (referee) ; Polsterová, Helena (advisor)
This paper contains 5 main parts. The first deals with the general description and properties of the climatic chambers, their individual parts and how these parts work. The second part deals with the chamber of Angelantoni CH 340. In detail is described how the chamber works and there is description of this chamber up to individual parts. The third part deals with the reconstruction project, the possibilities of reconstruction and the method that the chamber reconstructed. The fourth part describes the hardware that had to be selected and replaced and which parts of the chamber had to be modified. In the last part is a description of the program that controls the chamber after the reconstruction.
|
guest ::
